test

README.md

@@ -0,0 +1,102 @@
+# WireGuard with UI
+
+## K8s and unsafe option
+
+Config file on k8s host
+
+```shell
+sudo nano /var/snap/microk8s/current/args/kubelet
+```
+
+add `ipv4` and `ipv6` to be added to the end of the `kubelet` file.
+
+> --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding
+
+## Changing IP
+
+these are recommended, as we use 8.0.0.0/8 for other things...
+
+```
+IPv4 172.16.0.0/24
+IPv6 fdb0::/112
+```
+
+> info: changing ip's, a restart of the pod is needed... for iptables and nat to change to new ip.
+
+## Rout traffic
+
+Here is two ways of making the k8s server handle routing of traffic
+
+### persistent iptables
+
+```shell
+sudo apt install iptables-persistent
+```
+
+- replace `<interface>` with your network card like `eth0`.
+- replace `<host-ipv4>` with ip like `10.8.0.0/24`.
+- replace `<host-ipv6>` with ip like `fdcc:ad94:bacf:61a4::cafe:0/112`.
+
+```shell
+sudo iptables -t nat -A POSTROUTING -s <host-ipv4> -o <interface> -j MASQUERADE
+sudo iptables -t nat -A POSTROUTING -s <host-ipv6> -o <interface> -j MASQUERADE
+```
+
+```shell
+sudo netfilter-persistent save
+```
+
+### Systemd service
+
+create this file `/etc/systemd/system/wireguard-masquerade.service`
+
+```shell
+sudo nano /etc/systemd/system/wireguard-masquerade.service
+```
+
+Changes
+
+- replace `<interface>` with your network card like `eth0`.
+- replace `<host-ipv4>` with ip like `10.8.0.0/24`.
+- replace `<host-ipv6>` with ip like `fdcc:ad94:bacf:61a4::cafe:0/112`.
+
+```
+[Unit] 
+Description=WireGuard MASQUERADE for <host-ipv4> and <host-ipv6>
+After=network.target 
+
+[Service] 
+Type=oneshot 
+ExecStart=/sbin/iptables -t nat -A POSTROUTING -s <host-ipv4> -o <interface> -j MASQUERADE 
+ExecStart=/sbin/ip6tables -t nat -A POSTROUTING -s <host-ipv6> -o <interface> -j MASQUERADE
+RemainAfterExit=yes 
+
+[Install] 
+WantedBy=multi-user.target
+```
+
+#### Enable
+
+```shell
+sudo systemctl enable wireguard-masquerade
+```
+
+#### Start
+
+```shell
+sudo systemctl start wireguard-masquerade
+```
+
+## check system
+
+check IPv4 packet forwarding status.
+
+```shell
+kubectl -n wireguard exec -it pod/wg-easy-0 -- sysctl net.ipv4.ip_forward
+```
+
+check IPv6 packet forwarding status.
+
+```shell
+kubectl -n wireguard exec -it pod/wg-easy-0 -- sysctl net.ipv6.conf.all.forwarding
+```