WireGuard with UI

K8s and unsafe option

Config file on k8s host

sudo nano /var/snap/microk8s/current/args/kubelet

add ipv4 and ipv6 to be added to the end of the kubelet file.

--allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding

Changing IP

these are recommended, as we use 8.0.0.0/8 for other things...

IPv4 172.16.0.0/24
IPv6 fdb0::/112

info: changing ip's, a restart of the pod is needed... for iptables and nat to change to new ip.

Rout traffic

Here is two ways of making the k8s server handle routing of traffic

persistent iptables

sudo apt install iptables-persistent

replace <interface> with your network card like eth0.
replace <host-ipv4> with ip like 10.8.0.0/24.
replace <host-ipv6> with ip like fdcc:ad94:bacf:61a4::cafe:0/112.

sudo iptables -t nat -A POSTROUTING -s <host-ipv4> -o <interface> -j MASQUERADE
sudo iptables -t nat -A POSTROUTING -s <host-ipv6> -o <interface> -j MASQUERADE

sudo netfilter-persistent save

Systemd service

create this file /etc/systemd/system/wireguard-masquerade.service

sudo nano /etc/systemd/system/wireguard-masquerade.service

Changes

replace <interface> with your network card like eth0.
replace <host-ipv4> with ip like 10.8.0.0/24.
replace <host-ipv6> with ip like fdcc:ad94:bacf:61a4::cafe:0/112.

[Unit] 
Description=WireGuard MASQUERADE for <host-ipv4> and <host-ipv6>
After=network.target 

[Service] 
Type=oneshot 
ExecStart=/sbin/iptables -t nat -A POSTROUTING -s <host-ipv4> -o <interface> -j MASQUERADE 
ExecStart=/sbin/ip6tables -t nat -A POSTROUTING -s <host-ipv6> -o <interface> -j MASQUERADE
RemainAfterExit=yes 

[Install] 
WantedBy=multi-user.target

Enable

sudo systemctl enable wireguard-masquerade

Start

sudo systemctl start wireguard-masquerade

check system

check IPv4 packet forwarding status.

kubectl -n wireguard exec -it pod/wg-easy-0 -- sysctl net.ipv4.ip_forward

check IPv6 packet forwarding status.

kubectl -n wireguard exec -it pod/wg-easy-0 -- sysctl net.ipv6.conf.all.forwarding